Expert Tips and Tricks for a Seamless LG Washing Machine Bearing Replacement

If your LG washing machine is rumbling, leaking, or vibrating excessively, it's likely that the bearings need to be replaced. This is a common repair that can be completed in a few hours with the right tools and knowledge.

Essential Tools and Materials

New bearing kit compatible with your LG washing machine

Socket wrench set

Screwdriver

Hammer

Punch

Grease

Rags

Step-by-Step Guide

Disconnect the Appliance: Turn off the power and water supply to the washer. Unplug the unit and drain any remaining water through the hose.

Remove the Back Panel: Locate the back panel of the washer and remove the screws holding it in place. Carefully lift the panel off.

Access the Bearing Housing: Remove the bolts securing the drum to the motor. Gently pry the drum off the motor shaft, exposing the bearing housing.

Remove the Old Bearings: Insert a punch into the outer race of the old bearing. Strike the punch with a hammer to loosen the bearing. Repeat for the other bearing.

Install the New Bearings: Apply grease to the outer race of the new bearings and slide them into the housing. Tap them into place with a hammer using a socket as a spacer.

Reassemble the Washer: Reattach the drum to the motor shaft and tighten the bolts. Replace the back panel and secure it with screws. Reconnect the power and water supply, and run a test cycle to ensure proper operation.

Common Mistakes to Avoid

Using the Wrong Bearings: Ensure you purchase a bearing kit specifically designed for your LG washing machine model. Using the wrong bearings can lead to premature failure.

Overtightening Bolts: Tighten the bolts just enough to secure the drum. Overtightening can damage the housing and bearings.

Not Applying Grease: Apply grease to the bearings to reduce friction and extend their lifespan.

Estimated Cost: The cost of a new bearing kit ranges from $30 to $100, depending on the model. Labor costs vary based on the location and complexity of the repair. On average, you can expect to pay between $150 and $300 for a professional LG washing machine bearing replacement.

Success Stories

"My LG washing machine was making an awful noise. I replaced the bearings following your guide, and it's running like new now." - Sarah W.

"I thought I needed a new washing machine, but replacing the bearings saved me a lot of money. Thanks for the clear instructions!" - John D.

"I highly recommend your service for LG washing machine bearing replacement. My washer is working perfectly now." - Mary S.

Resources

LG Washing Machine Bearing Replacement Parts

How to Replace Washing Machine Bearings

Conclusion

Replacing the bearings on an LG washing machine is a straightforward repair that can save you time and money. With the right tools and knowledge, you can complete this task in a few hours and restore your washer to optimal performance.

Expert Tips and Tricks for a Seamless LG Washing Machine Bearing Replacement